Filter
Top Products
printer. Monitor your activities to see if there is a correlation between
your use of a certain application and the printer resetting. If so, con-
tact the application developer.
Downloading too many typefaces can overload the printer memory
and cause the printer to reset to default. Additional memory (RAM),
which can be used for font storage, is available and easily installed.
Contact your QMS vendor for information on RAM upgrades. See
chapter 8, “Printer Options.
If the printer resets in other circumstances, you should call your QMS
vendor for service.
If a blank start-up page ejects or blank pages come out during a print-
ing job, try the following:
1 Check the toner cartridge.
The image does not print if the cartridge is empty.
2 Be sure you have broken the tab on the side of the toner car-
tridge and removed the sealing tape.
3 If the toner cartridge is not empty, the sealing tape has been
removed, and blank pages are ejecting, take the cartridge
out, roll it from side to side, and reinstall the cartridge in the
printer.
4 If these solutions do not work, contact your QMS vendor to
purchase another toner cartridge.
If the printer stops printing in the middle of your file, try the following:
1 Check your cable.
You could have the wrong kind of cable, or your printer may not
be configured for the correct cable and port.
2 Make sure no one pressed the Cancel key while your job was
printing.