Filter
Top Products
c9pu179
8. Close the stapler cover.
9. Plug the power cords back into the printer and 2000-sheet finisher and turn printer
and 2000-sheet finisher power back on.
Performing a Stapler Test
After you replace a staple cartridge, you should perform a stapler test from the
Operator Panel. Follow these steps:
1. Press the Online key to take the printer offline.
2. Press the Menu key to select TEST MENU.
3. Press the Item key to select STAPLE TEST.
4. Press the Enter key to start the stapler test. A test page is printed and stapled. If
the test page is not stapled, check the staple cartridge.
5. Press the Online key to make the printer online and ready to print the next print
job.
148 User's Guide