Filter
Top Products
“Using the Operator Panel Keys” on page 30 and “Navigating Menus — Two
Examples” on page 31 before continuing.
CONFIG MENU
ITEM
VALUE Description
JAMRECOVERY OFF*
ON
Sets the JAMRECOVERY function on or off.
OFF—the printer does not keep an image of the printed
page. Jammed pages are not reprinted.
ON—the printer keeps the image for a printed page until the
page successfully exits the printer. Jammed pages are
automatically reprinted. Selecting ON can decrease the
performance of your printer.
AUTOCONTINUE ON*
OFF
Sets the auto-continue function on or off.
ON—following certain types of errors (such as memory
allocation errors), the printer pauses for thirty seconds, and
then continues running.
OFF—following the same types of errors, the printer stops
and waits for operator intervention. (Generally, the operator
either presses the Continue key to continue printing, or the
Cancel Print key to cancel the current job.)
DENSITY nn Sets the toner density. nn can be from 0 to 15 where 0 is the
least dense (lightest) and 15 is the most dense (darkest). 6 is the
default value. Please note that increasing the density setting can
increase the amount of toner used. If you find you are using more
than the expected amount of toner, you may want to decrease
the density setting.
PWRSAV 30 MIN*
1HR
2HR
3HR
4HR
OFF
15 MIN
Specifies how long the printer is inactive before it goes into
power-savings (sleep) mode. In this mode, the printer powers
down most of its systems and therefore requires extra time to
warm up when the next print is requested.
QUALITY REFINE*
ECONO
NORMAL
Specifies the print quality.
REFINE—tells the printer to smooth edges. This setting may
use more toner than the ECONO or NORMAL modes.
ECONO—tells the printer to produce lighter output, thus
saving toner. (ECONO is the same as TonerMiser.)
NORMAL—normal quality.
Note: The printer driver term for REFINE is Edge Refinement.
52 User's Guide