Filter
Top Products
72 ERROR DISK CALL FOR SERVICE
Meaning: The printer has detected a problem with the hard drive. Hard
drive cannot write data.
Action: Call for service.
73 ERROR DISK CALL FOR SERVICE
Meaning: The printer has detected a problem with the hard drive. Hard
drive cannot read data.
Action: Call for service.
80 ADD MEMORY FOR IPDS
Meaning: The printer requires more memory before it can process IPDS
jobs.
Action: Install more memory. See “Estimating Memory Requirements” on
page 199 for information about IPDS memory requirements.
81 INSUFFICIENT MEMORY FOR IPDS
Meaning: The printer does not have enough memory to process IPDS
jobs.
Action: Power off the printer, wait twenty seconds, and then power on the
printer to clear memory. If the problem persists, you may need to install
more memory. See “Estimating Memory Requirements” on page 199 for
information about IPDS memory requirements.
82 HOST TIMEOUT
Meaning: The coax network interface card has sent an Intervention
Required message to the host. The message is displayed if: A) the printer
is OFFLINE for longer than the HLD TMEOUT setting in the Coax Setup
Menu OR B) the printer has been in an intervention state (such as out of
paper) for longer than the IRQ TMEOUT setting AND C) you have
corrected the problem. For example, if paper is jammed in the printer, the
printer displays a paper jam message. After you correct the paper jam, the
printer then displays 082 HOST TIMEOUT. The 082 HOST TIMEOUT
message is informational and is used to signal the host that a problem
occurred.
Action: When the message is displayed, press the CONTINUE button to
continue printing. You can change the IRQ TMEOUT setting for some IRQ
conditions, such as end of forms, but not for all IRQ conditions, such as a
paper jam. (A paper jam always causes 082 HOST TIMEOUT to be
displayed.)
83 CX SEND STATE
Meaning: Your coax host has placed your printer in “Send State” and is
waiting for the printer to return a PA signal.
Action: Press the Continue key. This sends a PA signal back to the host
and clears the condition. (You may need to press the key more than
once.)
234 User's Guide