Filter
Top Products
c9pu179
6. Close the stapler cover.
7. Plug the power cords back into the printer and 2000-sheet finisher.
8. Turn printer and 2000-sheet finisher power back on.
Installing the Printer Stand
The printer stand supports the printer and provides an area for paper and supplies
storage.
Follow these steps to install the printer stand:
1. Turn printer power off and unplug power cord.
2. Unpack the printer stand.
3. Move the printer stand to the location where you want to locate the printer. Press
down on the casters on the part labeled ON to lock the casters in place. This
prevents the printer from rolling.
CAUTION:
When moving the printer, keep in mind that the back of the printer is heavier
than the front.
Chapter 7. Installing Printer Options 193