IBM 24PS Printer User Manual


 
Coax DSC/DSE Menu
Use the Coax DSC/DSE Menu to define how the printer handles DSC/DSE
communications over the coax attachment. The following table describes the settings
you can change from the Coax DSC/DSE Menu. The options you specify apply only to
DSC/DSE mode. An asterisk (*) next to a value means it is the factory default. This
menu appears only if you have the coax attachment installed.
Notes:
1. To select a new value, press the Enter key when the value is displayed in the
message display area. An asterisk (*) appears next to the value in the message
display area, indicating that it is now active.
2. For more information about configuring the coax attachment, see
IBM Network
Printers: Twinax/Coax Configuration Guide
.
3. If you are unfamiliar with using the operator panel to work with menus, please read
“Using the Operator Panel Keys” on page 30 and “Navigating Menus — Two
Examples” on page 31 before continuing.
COAX DSC/DSE
MENU ITEM
VALUE Description
PRINT IMAGE ON*
OFF
Selects printing options in non-SCS mode.
ON
True Screen image in Local Copy
True Screen image in Non-SCS print
Unformatted print in Local Copy
Unformatted print in Non-SCS print
OFF
Null line suppression in Local Copy
Null line suppression in Non-SCS print
Formatted print in Local Copy
Formatted print in Non-SCS print
CR AT MPP+1 ON*
OFF
Sets a carriage return relative to the maximum print position
(MPP).
ON—a new line occurs when the carriage return occurs at
MPP+1. The next print position is at the first print position of
the new line (current line + 1, column 1).
OFF—no new line occurs when the carriage return occurs at
MPP+1. The next print position is at the first print position of
the current line (current line, column 1).
Chapter 3. Navigating Through the Operator Panel Menus 73