Filter
Top Products
Chapter 14. Data migration in zSeries environments 305
DEVICE DESCRIPTOR = 0A
ADDITIONAL DEVICE INFORMATION = 4A000035
ICK04030I DEVICE IS A PEER TO PEER REMOTE COPY VOLUME
QUERY REMOTE COPY - VOLUME
(PRIMARY) (SECONDARY)
SSID CCA SSID CCA
DEVICE LEVEL STATE PATH STATUS SER # LSS SER # LSS
------ --------- -------------- ----------- ----------- -----------
6102 PRIMARY PENDING XD ACTIVE 6100 02 8100 02
22665 01 22673 01
PATHS SAID/DEST STATUS DESCRIPTION
----- --------- ------ ----------------
1 00A4 0020 13 ESTABLISHED Fibre Channel PATH
IF PENDING/SUSPEND: COUNT OF TRACKS REMAINING TO BE COPIED = 2147
ICK02206I PPRCOPY QUERY FUNCTION COMPLETED SUCCESSFULLY
ICK00001I FUNCTION COMPLETED, HIGHEST CONDITION CODE WAS 0
00:33:54 11/19/04
After all applications are stopped or shut down, Global Copy eventually replicates all data
across and the respective count is zero, as shown in Example 14-3.
Example 14-3 All data is replicated
PPRCOPY DDNAME(DD02) QUERY
ICK00700I DEVICE INFORMATION FOR 6102 IS CURRENTLY AS FOLLOWS:
PHYSICAL DEVICE = 3390
STORAGE CONTROLLER = 2105
STORAGE CONTROL DESCRIPTOR = E8
DEVICE DESCRIPTOR = 0A
ADDITIONAL DEVICE INFORMATION = 4A000035
ICK04030I DEVICE IS A PEER TO PEER REMOTE COPY VOLUME
QUERY REMOTE COPY - VOLUME
(PRIMARY) (SECONDARY)
SSID CCA SSID CCA
DEVICE LEVEL STATE PATH STATUS SER # LSS SER # LSS
------ --------- -------------- ----------- ----------- -----------
6102 PRIMARY PENDING XD ACTIVE 6100 02 8100 02
22665 01 22673 01
PATHS SAID/DEST STATUS DESCRIPTION
----- --------- ------ ----------------
1 00A4 0020 13 ESTABLISHED Fibre Channel PATH
IF PENDING/SUSPEND: COUNT OF TRACKS REMAINING TO BE COPIED = 0
ICK02206I PPRCOPY QUERY FUNCTION COMPLETED SUCCESSFULLY
ICK00001I FUNCTION COMPLETED, HIGHEST CONDITION CODE WAS 0
00:34:10 11/19/04
As these examples demonstrate, it is a bit hard to read and to find in the ICKDSF line output.
Probably some REXX-based procedure might have to scan through the ICKDSF SYSPRINT
output, which is directed to a data set. ICKDSF asks for a JCL DD statement for each single
volume to query when the volume is ONLINE to the system. This is not very handy. So, we