Filter
Top Products
ENDTECADP
Stops the AS/400 adapter.
Context
ENDTECADP EVTADP(name | *ALL)[OPTION(*CNTRLD | *IMMED)]
[DELAY(seconds)]
Comments
The AS/400 adapter runs as a batch job. The ENDTECADP command stops an
AS/400 adapter.
Authorization
QSYSOPR
*USE
PUBLIC
*EXCLUDE
Note: To grant other users authority to this command, use the following
commands on the AS/400 system:
GRTOBJAUT OBJ(QSYS/ENDTECADP) OBJTYPE(*CMD) USER(user) AUT(*USE)
GRTOBJAUT OBJ(QTMETECA/ENDEVENTAD) OBJTYPE(*PGM) USER(user) AUT(*USE)
Arguments
EVTADP Specifies the name of the adapter to stop. The following options
can be specified:
name Specifies the name of the adapter being stopped. This file
name matches the name specified on the STRTECADP
command.
*ALL If *ALL is specified, then all adapters of all types are
stopped.
OPTION Specifies the way the adapter stops. The following options can be
specified:
*CNTRLD
The adapter ends in a controlled manner. This lets the
application program perform end-of-job processing.
*IMMED
The adapter is ended immediately.
Stopping the adapter immediately does not allow the
adapter to perform cleanup routines and is not
recommended.
DELAY(seconds)
Specifies the amount of time in seconds allowed for the adapter to
complete its cleanup processing during a controlled end. This
parameter is not used if *IMMED is specified for the OPTION
parameter. If the cleanup is not completed before the end of the
delay time, the adapter is ended immediately.
30 IBM Tivoli Enterprise Console: Adapters Guide