Filter
Top Products
tecadnw4.nlm
Starts the NetWare log file adapter in non-service mode.
Flags
Load tecadnw4 [–c ConfigFile][–d]
Description
Loading tecadnw4.nlm starts the adapter. To stop the adapter, run the following
from the command line:
unload tecadnw4
Authorization: None is required.
Arguments:
–c ConfigFile
Specifies the configuration file for the NetWare log file adapter. If a value
is not specified, the TECADNW4.CNF file in the current directory is used.
If the –c argument is used, you can optionally specify a full path name for
the configuration file; otherwise, the default configuration file,
SYS:ETC\TIVOLI\TECAD\ETC\ TECADNW4.CNF, is used.
–d Shows verbose diagnostic information in the NLM screen as events are
gathered and transmitted. Press the Alt+Esc or Ctl+Esc keys to switch to
other NLMs screens or to return to the console.
Note: Without the –d option, the adapter displays the initial startup
messages on its screen but will close it upon completion of
initialization, and the adapter name will not be displayed in the list
of NLMs when the Ctrl+Esc keys are pressed.
Examples
The following command starts the NetWare log file adapter in debug mode:
load tecadnw4 -d
The following command starts the NetWare log file adapter with the myconf.cnf
configuration file:
load tecadnw4 -c sys:etc\tmp\myconf.cnf
62 IBM Tivoli Enterprise Console: Adapters Guide