Filter
Top Products
50790402 Segment Marginal
50790403 Network Normal
50790404 Network Marginal
50790405 Segment Added
50790406 Segment Deleted
50790407 Network Added
50790408 Network Deleted
50790409 Connection Added
50790410 Connection Deleted
50790411 Change Polling Period
50790412 Forced Poll
50790418 Manage Node
50790419 Unmanage Node
50790420 Manage Segment
50790421 Unmanage Segment
All OpenView events are supported by the OpenView adapter.
Troubleshooting the OpenView Adapter
Perform the following steps to troubleshoot the OpenView adapter:
1. Make sure that the tecad_hpov.lrf entry is correct and has been registered with
OpenView using the ovaddobj command.
2. If the adapter does not start, look for errors in the .lrf, .oid, and .cds files.
3. If the adapter stops unexpectedly, look for data that is not valid being passed
in a trap or functions. For example, PREFIX is called on a list of strings value
instead of a string value.
4. Change all /dev/null entries in the .err file to the file name you want. Stop and
restart the adapter, send an event through, and then look in the trace file to see
what processing was done on the event.
5. Look in /tmp/hpov_start.err for possible startup errors from the tecad_hpov.sh
script.
Chapter 5. OpenView Adapter 77