Filter
Top Products
Configuration (Config) Menu
Use the Configuration Menu to configure the printer. The following table describes the
settings you can change from the Configuration Menu. An asterisk (*) next to a value
in the table indicates the factory default.
Notes:
1. To select a new value, press the Continue/Enter key when the value is displayed
in the message display area. An asterisk (*) appears next to the value in the
message display area, indicating that it is now active.
2. Values set in print jobs (either by the print application or the printer driver) override
values you set at the printer.
3. If you are unfamiliar with using the operator panel to work with menus, please read
“Using the Operator Panel Keys” on page 10 and “Navigating Menus” on page 12
before continuing.
CONFIG MENU
ITEM
VALUE Description
JAMRECOVERY OFF*
ON
Sets the JAMRECOVERY function on or off.
OFF—the printer does not keep an image of the printed
page. Jammed pages are not reprinted.
ON—the printer keeps the image for a printed page until the
page successfully exits the printer. Jammed pages are
automatically reprinted. Selecting ON can decrease the
performance of your printer.
AUTOCONTINU ON*
OFF
Sets the auto-continue function on or off.
ON—following certain types of errors (such as memory
allocation errors), the printer pauses for thirty seconds, and
then continues running.
OFF—following the same types of errors, the printer stops
and waits for operator intervention. (Generally, the operator
either presses the Continue/Enter key to continue printing,
or the Cancel Print key to cancel the current job.)
DENSITY nn Sets the toner density. nn can be from 0 to 12 where 0 is the
least dense (lightest) and 12 is the most dense (darkest). 3 is the
default value.
PWRSAV 30 MIN*
1HR
2HR
3HR
4HR
OFF
15 MIN
Specifies how long the printer is inactive before it goes into
power-savings (sleep) mode. In this mode, the printer powers
down most of its systems and therefore requires extra time to
warm up when the next print is requested.
Chapter 5. Operator Panel Menus 81