Filter
Top Products
Paper Menu
Use the Paper Menu to select input trays, output bins, paper sizes, and duplex printing
options. The following table describes the settings you can change from the Paper
Menu. An asterisk (*) next to a value in the table indicates the factory default.
Notes:
1. To select a new value, press the Continue/Enter key when the value is displayed
in the message display area. An asterisk (*) appears next to the value in the
message display area, indicating that it is now active.
2. Values set in print jobs (either by the print application or the printer driver) override
values you set at the printer.
3. The actual menu items you see depend on what options you have installed. To
find out what options you have installed, print a printer configuration page. See
“Printing the Printer Configuration Page” on page 13 for more information.
4. If you are unfamiliar with using the operator panel to work with menus, please read
“Using the Operator Panel Keys” on page 10 and “Navigating Menus” on page 12
before continuing.
5. See “Using the Paper Menu” on page 53 for examples of changing values on the
Paper Menu.
PAPER MENU
ITEM
VALUE Description
SOURCE TRAY1*
TRAY2
TRAY3
AUXTRAY
ENVELOPE
Selects the default paper tray to use. Only installed trays appear
in the list.
TRAY1 is the standard 250-sheet input tray.
TRAY2 and TRAY3 are the optional 500-sheet input trays; if
you do not install them, they will not be in the list. If both are
installed, TRAY2 is the upper 500-sheet tray and TRAY3 is
the lower 500-sheet tray.
AUXTRAY is the flip-down tray in the front of the printer.
Note: If TRAY2 is installed, it is the default.
OUTPUT MAIN*
OFFSET
BIN1
BIN2
BIN3
BIN4
BIN5
BIN7
BIN8
BIN9
BIN10
Specifies the default output bin. Note that OFFSET and
BIN1-BIN10 are displayed in the menu only if you have installed
the optional 500-sheet Offset Paper Tray Output and the Optional
10-Bin Mailbox.
Chapter 5. Operator Panel Menus 77