IBM S544-5343-03 Printer User Manual


 
5. Adjust the size guide on the right side of the auxiliary tray to the paper size. Make
sure you place the edges of the paper under the retaining clip at the right side of
the auxiliary tray.
6. Make sure the paper fits correctly in the auxiliary tray. The paper should lay flat in
the tray and should not be bowed.
7. Use your print application or the Paper Menu to set AUXSIZE to match the paper
size you loaded in the auxiliary tray (see “Defining the Auxiliary Tray Paper Size”
on page 54). Values specified in print jobs override values you set at the printer.
If you want to feed the paper manually into the auxiliary tray, use your print
application or the Paper Menu to set MANUAL to ON (see “Paper Menu” on
page 77).
Note: PostScript jobs can override MANUAL=OFF; however, they cannot override
MANUAL=ON. Therefore, if you do set MANUAL to ON, make sure you reset
MANUAL to OFF after you complete the jobs you want to print manually.
Chapter 3. Paper Handling 31