Intel 1300 Network Hardware User Manual


 
70
Supported memory
The BIOS assesses the SDRAM size and speed using the serial presence detect
(SPD) data structure programmed into an EEPROM on the DIMM. Memory size
is 16 MB to 1 GB. DIMM board memory size can be mixed but must be either all
unbuffered or all registered. Slot vacancies are allowed.
The server board supports the following memory features:
168-pin SPD DIMMs with gold-plated contacts (using DIMMs with contacts
that are not gold plated can cause memory failures that result in data
corruption)
66 MHz or 100 MHz unbuffered or registered SDRAM, 72-bit ECC, 3.3 V
Single- or double-sided non-stacked DIMMs in the sizes listed below
Unbuffered DIMMs of the following sizes: 16 MB, 32 MB, 64 MB, 128 MB,
and 256 MB for a maximum memory size of 1 GB
Registered DIMMs of the following sizes: 64 MB, 128 MB, and 256 MB for
a maximum memory size of 1 GB