Filter
Top Products
Intel® Server Board SE7320SP2 & Intel Server Board SE7525GP2 TPS Error Reporting and Handling
Revision 2.0
135
The response section in the following table is divided into three types:
• Warning: The message is displayed on screen and the error is logged to the SEL. The
system will continue booting with a degraded state.
• Pause: The message is displayed on the screen and the boot process is paused until
the appropriate input is given to either continue the boot process or take corrective
action.
• Halt: The system cannot boot unless the error is corrected.
Table 58. POST Error Messages and Handling
Error Code Error Message Response
0000 Timer Error Pause
0003 CMOS Battery Low Pause
0004 CMOS Settings Wrong Pause
0005 CMOS Checksum Bad Pause
0008 Unlock Keyboard Halt
0009 PS2 Keyboard not found
Not an
error
000A KBC BAT Test failed Halt
000B CMOS memory size different Pause
000C RAM R/W test failed Pause
000E A: Drive Error Pause
000F B: Drive Error Pause
0010 Floppy Controller Failure Pause
0012 CMOS time not set Pause
0014 PS2 Mouse not found
Not an
error
0040 Refresh timer test failed Halt
0041 Display memory test failed Pause
0042 CMOS Display Type Wrong Pause
0043 ~<INS> Pressed Pause
0044 DMA Controller Error Halt
0045 DMA-1 Error Halt
0046 DMA-2 Error Halt
0047 Unknown BIOS error. Error code = 147 (this is really a PMM_MEM_ALLOC_ERR) Halt
0048 Password check failed Halt
0049 Unknown BIOS error. Error code = 149 (this is really SEGMENT_REG_ERR) Halt
004A Unknown BIOS error. Error code = 14A (this is really ADM_MODULE_ERR) Pause
004B Unknown BIOS error. Error code = 14B (this is really LANGUAGE_MODULE_ERR) Pause
004C Keyboard/Interface Error Pause
004D Primary Master Hard Disk Error Pause
004E Primary Slave Hard Disk Error Pause
004F Secondary Master Hard Disk Error Pause
0050 Secondary Slave Hard Disk Error Pause
0055 Primary Master Drive - ATAPI Incompatible Pause
0056 Primary Slave Drive - ATAPI Incompatible Pause