Filter
Top Products
Windows 2000:
Go to the Mouse Control Panel, select
the Mouse Properties tab, then go to the
Pointer Options screen.
1. Set the pointer speed slide bar to the
exact middle.
2. In the Acceleration panel, select
“None.”
3. Uncheck the “Move pointer to the
default button in dialog boxes” option.
4. Click “OK.”
Windows 98:
Go to the Mouse Control Panel, select
the Mouse Properties tab, then go to the
Motion screen.
1. Set the pointer speed slide bar to
“Slow” (all the way to the left).
2. Click “OK.”
NOTE: As shown above, mouse settings differ depending on the operating platform; some
presenting mouse acceleration options, some not. If you see any mouse acceleration option,
uncheck (deactivate) it. If there is no mouse acceleration available on the Settings screen, adjust
the mouse speed slide bar either to x1 or the slowest position (such as on Linux platforms). In
some cases, a middle position on the speed slide bar may be required for mouse synchronization
on the viewer side (as with Windows XP, for example); or a bit of trial-and-error conguring may
be necessary to set your mouse acceleration to Off and the speed to x1.
Additional Server Conguration Considerations
For optimal performance of the Digital KVM over IP Switch and whatever devices it’s connected
to, keep these conguration points in mind for networked computers and servers.
Select resolution modes that are within the switch’s standard support parameters:
10
INSTALLATION