Filter
Top Products
TCP/IP Settings
TCP Port Base: You can freely specify the port base for viewer connection with the server.
Choose any available port base, starting from the lowest alternative of Port 5900 in
increments of 10 up to Port 6090. The port base you choose is exactly the port number the
switch uses for viewer connection. Also, “port base + 8” is the exact port number you’ll use
for secure http connection to the browser. After you have made the port base modication,
click “Store Settings” and then click “Apply Settings”/“Restart Servers” to effect changes.
Host Name: This is the name the switch will assume on your local area network.
Domain Name: Specify the domain name for your switch as it appears on your LAN. (Leave it
empty if you don’t know.)
Use DHCP: This allows the switch to get all TCP/IP settings automatically from a DHCP server.
IP Address: Enter a xed IP address (in dotted decimal format, such as 192.168.1.200) that
will be used by the switch in your LAN.
Network Mask: Enter a net mask value (in dotted decimal format, such as 255.255.255.0) that
will be used by the switch in your LAN.
Gateway: Enter the xed IP address (in dotted decimal format, such as 192.168.1.254) of the
gateway (e.g., router) to access the Internet.
DNS: Enter the IP address (in dotted decimal format, such as 80.10.246.30) of the DNS server
used by the switch for domain name resolution. (Ask your administrator if you don’t know.)
NOTE: You must enter a valid DNS server IP address for the e-mail alert to be effective.
Main: WAN PPP
This screen lets you set the PPP server/client mode of your switch: to serve either as a PPP
server for the remote computers to dial in for connection or as a PPP client to dial in to a PPP
server to connect to a network or the Internet. The PPP connection can also serve as a backup
connection mode when a direct network connection is not available. The switch’s high-speed
serial interface can offer excellent bandwidth to PPP connections. After you’ve made all
modications, click “Store Settings,” then “Apply Settings”/“Restart Servers.”
34
MANAGEMENT OVER A BROWSER