Filter
Top Products
if it is back to normal. Second, If clicking “Restart Servers” doesn’t solve the problem, click
“Emergency Reboot” on the Maintenance screen of the Web Management interface for a
complete start from ground level. An emergency reboot is a clean reboot, and it takes longer
for the switch and video server to load; thus, you need to wait at least a minute for the system
to be up and running. Then try to make the viewer connection again to see if it’s been brought
back to normal. NOTE: A cold boot is always a last resort to bring the switch back: Disconnect
the power adapter from the switch and wait about 30 seconds before plugging it back in and
restarting.
ManageMent oVer a Secure httPS browSer
The switch’s Web Management interface uses only password authentication to authenticate a
login user’s identity. After a user identity is authenticated (that is, if you have entered the right
username with the right password in the login prompt), an SSL-secured browser connection
using 256-bit cipher strength is established.
Web-Based Management Interface
Enter a correct IP address and port number in the address eld:
https://<IP_address>:<port_number> ‡ https://61.222.144.195:5908
NOTE: Remember that it’s a secure SSL-encrypted connection, so you should enter “https”
instead of the usual “http”; otherwise, the connection will not be established. The port number
may vary according to its setting on the server. By default, the browser connection uses port
5908. Both the username and password are case-sensitive.
User Privileges: SUPERADMIN, ADMIN, USER
The switch offers three categories of user privileges for Web Management:
28
MANAGEMENT OVER A BROWSER