Filter
Top Products
Port Base Settings
NOTE: If you’re satised with the default port base setting as 5900, you can skip this section.
The default port base for switch connection is set at 5900. This means it will use port 5900
(port base) for viewer connection and port 5908 (port base + 8) for https Web browser connection.
• for viewer connection: <Port base>
• for secure browser connection: <Port base + 8>
However, if you intend to use your own port base setting, just access the Web Management
interface and congure the port base as follows:
1. C
For example, if you choose 5970 as your port base, then you have:
• for viewer connection: 5970
• for secure browser connection: 5978
Click “Submit” and “Apply Settings” to validate the new settings. The switch is now installed
within your LAN, and you’re able to proceed with establishing a remote viewer connection.
Template – Windows Internet Explorer
https://192.168.1.200.5978
13
INSTALLATION