Filter
Top Products
14 Appendix A Configuration Options
Kingston Technology Company MCMaster User’s Guide - Rev. B06
;remove semicolon from next line
;if you wish to use INITPROG
;initprog 80
Edit the line with "initprog 80" to delete the semicolon. The two lines
should now read:
;remove semicolon from next line
;if you wish to use INITPROG
initprog 80
5. Save the ADF file back out to the disk.
6. Exit the editor.
Now you can run the Set Configuration program and set the Operating Mode to
"INITPROG or IDD." The program will automatically install the initializer onto
your hard disk.
I/O selects
Default: 390h
Options: Too numerous to list here
This is the base I/O address for the MCMaster's own control ports. The Set
Configuration program will display an asterisk next to this address if there is a
conflict with a previously installed adapter. Press [F6] until you see an address
that does not conflict.
Arbitration Level
Default: Level_14
Options: Level_0 through Level_13
The Micro Channel includes logic to arbitrate bus requests among multiple
adapters: each adapter card must have its own arbitration level. If this level
conflicts with another adapter, you can change it to any other level.