Filter
Top Products
October 1997 1-1
1
Introduction
Thank you for purchasing the
KODAK Digital Science
8650/8650 PS
Color Printer.
The
KODAK Digital Science
8650 Printer operates only in raster mode.
The 8650 PS Printer is a PostScript language printer that also operates
in raster mode. You can purchase an upgrade kit for the 8650 Printer
that allows it to operate in both raster and PostScript modes.
The 8650/8650 PS Color Printer is a thermal dye diffusion device with
superior printing speed. It contains a 33 MHz MIPS RISC processor,
has a resolution of 300 dots per inch (DPI), and prints a three or four-
color page in about 75 seconds. Printed images are high-contrast and
long lasting. KODAK EKTATHERM XTRALIFE Ribbon (available with
3-color ribbon) can be used to protect images from fingerprints.
About printer memory
You can purchase the 8650/8650 PS Printer with 32 MB or 48 MB of
memory. You can add memory to the printer to a maximum of 64 MB.
If your printer has 32 MB of memory
, you can print all image sizes for
three-color or black ribbons. You cannot, however, print CMYK images
with 4-color ribbon. In addition, your ability to process one job while
printing another is limited.
If your printer has 48 MB of memory
, you can print all image sizes for all
ribbons. With 48 MB of memory, you can process one job at the same
time you are printing another while you are using 12-inch ribbon.
If your printer has 64 MB of memory
, you can process and print jobs of
all sizes at the same time.