Filter
Top Products
Setting up the printer
2-2 October 1997
Finding a location for the printer
As you look for an appropriate location for the printer, keep the following
guidelines in mind. Refer to Appendix A for site requirements.
•
Allow two inches (about 5 cm) on all sides of the printer for easy
access.
•
Place the printer so that air flow is not blocked.
•
Airborne dirt particles can cause image quality problems. Avoid
placing the printer in areas where ventilation ducts, open doors, or
frequent passers–by might expose the printer and media to high levels
of debris.
The space requirements for the printer are shown below.