Filter
Top Products
Operating the printer
October 1997 3-5
Port
(SCSI -
PostScript
mode only)
Initiator ID: 0 - 7
Enable: Yes and No
Initiator ID: Specifies the printer's SCSI ad-
dress when the printer is operating in Post-
Script mode.
Enable: When an external hard drive is con-
nected, allows the printer to act as the SCSI
bus initiator.
CAUTION: Leave the setting at NO un-
less an external drive is connected. Oth-
erwise, the computer's hard drive could
be damaged.
6
No
Port
(SCSI -
raster
mode only)
Target ID 0 - 7 Specifies the printer's SCSI address when
the printer is operating in raster mode.
5
Defaults
(Media
type)
Paper, Transparency,
Draft
• Select Paper if paper is loaded in the tray.
• Select Transparency to print high-density
transparencies.
• Select Draft for faster printing and
proofing of transparencies.
Paper
Defaults
(Factory)
Reset Lets you restore the printer settings to their
factory default values.
IMPORTANT: If the Network Interface Card
is installed, resetting to the factory defaults
may cause network printing problems.
Defaults
(Media col-
or)
Photographic, Commer-
cial, Publication
Media color choices allow you to print
proofs that approximate the color and hue
of the final press stock.
• Select Photographic to print onto stan-
dard white stock.
• Select Commercial to simulate collateral
applications.
• Select Publication to simulate magazine
applications.
Photographic
Language English, Francais,
Deutsch, Espanol,
Italiano
The display panel messages can appear in
English, French, German, Spanish, or
Italian.
English
Table 3-1. Printer settings