Kodak 8650 Printer User Manual


 
“Changes or modifications not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.”
Regulatory Information
The foregoing limits are designed to provide reasonable protection against harmful interference when
operated in a residential installation. However, there is no guarantee that interference will not occur in
a particular location. If this equipment does cause interference to radio or television reception
(determined by turning the equipment off and on), you are encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna
Relocate the printer with respect to the receiver
Move the printer away from the receiver
Plug the printer into a different outlet so that the receiver and printer are on different branch
circuits
If problems persist, consult an experienced radio/television technician for additional suggestions. You
may also find the following booklet, prepared by the Federal Communications Commission, helpful:
“How to Identify and Resolve Radio-TV Interference Problems.” This booklet can be purchased by
contacting the Superintendent of Documents, U.S. Government Printing Office, Washington, DC
20402.
Important
This equipment was tested using shielded interface cables. The use of these cables is required to
reduce the possibility of causing interference to radio and television reception.
Das Gerät ist gemäß Amtsblattberfügung 243/91 funkenstört und wurde der Deutschen Bundespost
gemeldet. Kodak AG, Stuttgart.
DIESES GERÄT WURDE SOWOHL EINZELN ALS IN EINER ANLAGE, DIE EINEN NORMALEN
ANWENDUNGSFALL NACHBILDET, AUF DIE EINHALTUNG DER
FUNKENTSTÖRBESTIMMUNGEN GEPRÜFT. ES IST JEDOCH MÖGLICH, DASS DIE
FUNKENSTÖRBESTIMMUNGEN UNTER UNGÜNSTIGEN UMSTÄNEN BEI ANDEREN
GERÄTEKOMBINATIONEN NICHT EINGEHALTEN WERDEN. DER BETREIBER IST FÜR DIE
EINHALTUNG DER FUNKENTSTÖRUNGS BESTIMMUNGEN SEINER GESAMTEN ANLAGE
VERANTWORTLICH, IN DER DIESES GERÄT BETRIEBEN WIRD.
This equipment has been tested and found to comply with the following:
UL 1950
CSA 950
TUV EN60950