Filter
Top Products
Setting up the printer
October 1997 2-21
3. Connect and secure the SCSI cable to one of the printer’s SCSI
ports.
4. Connect and secure the SCSI terminator to the open SCSI port (or
to the last device when daisy-chaining multiple devices.)
NOTE: If you are connecting the printer to a Macintosh IIfx
computer, a special Macintosh IIfx terminator is required.
Obtain this terminator from an Apple retailer.
5. Connect the power cord. See "Connecting the power cord" on
page 2-22.
6. Turn the printer
On
(press the power switch on the side of the printer
to |). When READY appears on the printer display panel, turn the
computer
On
.
SCSI ports
(Raster printing only)