Filter
Top Products
A-61070 September 1999 3-3
Temporary operating
values
Each of the 18 modes programmed at the time of installation contain
definitions that affect the output of the scanner. Each mode is
programmed to conform to the output requirements of a particular
application or group of applications.
There may be instances, however, when a particular application
requires some variation of an existing mode. In such instances, mode
definitions may be changed using available function codes. See
Chapter 4,
Function Codes,
for a listing and description of the available
function codes.
NOTE: Changes to mode definitions remain in effect until another
mode is selected or the side panel switch is turned off. The
original mode definition is only affected by these changes if
the mode overrides are saved (the mode override option may
be selected at installation and if selected, a plus sign (+)
appears in the first line of the status display).