Filter
Top Products
A-61070 September 1999 5-15
4. Pull the green rear lamp socket holder out from the scanner frame.
Be sure to pull the lamp socket holder straight out along its axis.
WARNING: Even though you can always handle the green
lamp socket holder, the lamp may be very hot. Do
not remove the lamp or the lamp socket holder
until the lamp has cooled.
NOTE: If the lamp socket holder pulls off from the lamp when
removing the lamp and socket from the scanner, remove
the lamp by grasping the lamp at the end, once it has
cooled.
5. Once the lamp has cooled, remove the lamp from the lamp socket
holder by carefully pulling the lamp straight out along its axis.
6. Replace the lamp, making sure that the clear slit on the lamp faces
toward the document path. In the case of the rear lamp, the clear
slit should face toward the front.
CAUTION: Lamps are fragile. Do not force the lamp into place.