Filter
Top Products
A-61070 September 1999 5-17
Replacing the imaging
guides
To replace the imaging guides, follow the steps below:
1. Open the side access door.
2. Release and open the vertical transport plate by rotating the release
handle 180° clockwise.
3. Release and remove the front imaging guide by rotating the
thumbscrew 90° counterclockwise, and lifting the guide’s two green
saddle mounts from the mounting shaft.
Front imaging guide
Thumbscrew
Rear imaging
guide
Magnets
4. Release and remove the rear imaging guide by swinging the guide
toward the front of the scanner (to release it from the two magnets),
and lifting it from the scanner’s two mounting pins.