Filter
Top Products
6-6 A-61070 September 1999
Code Message Displayed Description/Action Required
E217 Bar Code hardware error At power on, a Bar Code Reader hardware error has
been detected. Disable the Bar Code Reader (F60)
or select an application mode that does not use the
Bar Code Reader.
E222 Jam - Feed/Horz Trans Area A document jam has been detected in the feeder or
horizontal transport area.
• Clear the document path.
• Press C and then press the Jog key.
• Press Run and refeed document(s).
E223 Jam - Vert/Trans Exit Area A document jam has been detected in the vertical
transport or exit area.
• Clear the document path.
• Press C and then press the Jog key.
• Press Run and refeed document(s).
E224 Jam or Dble Feed - check
trans
A document jam or double feed has been detected.
• Clear the document path.
• Press C and then press the Jog key.
• Press Run and refeed document(s).
E225 Jam - check entire transport A document jam has been detected.
• Clear the document path.
• Press C and then press the Jog key.
• Press Run and refeed document(s).
E230 Open Door - entire transport This message is displayed with other document jam
messages. Open the access door and transport
plate as suggested by accompanying messages and
clear the document jam.
E232 Close all access doors One or more access doors are open. Close all
doors.
E234 Press JOG to remove docs
When pressing Run, a document was detected
under a document sensor. Press Jog to move all
documents in the transport system, then press Run
and rescan any documents that have not been
scanned.