Filter
Top Products
A-61070 September 1999 4-5
Code Function Code Name Description
F16 Alarm Tone Allows you to adjust the pitch of the alarm tone. Press the
Up arrow to increase the pitch or press the Down arrow
to decrease the pitch, then press Enter.
F17 Transport System
Operation Time
Allows you to display the elapsed time of operation of the
transport system. This time is recorded in the software
and will be reset if a ROM replacement is performed.
Therefore, the software time displayed and the time
displayed inside the side access door can vary.
F19 Display Language Allows you to choose your preferred language. The
options are:
0 = English
1 = Japanese
2 = French
3 = German
F20 Measurement System Allows you to choose your preferred measurement
system. The options are:
0 = millimeters
1 = inches
F21 Set Time Allows you to set the time on the status display. The
format is HH:MM. HH represents the hours (on a 24-hour
clock) and MM represents the minutes (valid values are
00 to 59). Enter the new time in the format illustrated and
press Enter.
F22 Set Date Allows you to set the date on the status display. The
format is YYYY/MM/DD. YYYY represents the year, MM
represents the month (valid values are 01 to 12), and DD
represents the day (valid values are 01 to 31). Enter the
new date in the format illustrated and press Enter.
F23 Time and Date Display Allows you to view the current time and date.
F40 Front and Rear Document
Printers On/Off
Allows you to turn the Front and Rear Document Printers
on or off. Enter 1 to turn on or 0 to turn off.
F41 Front Document Printer
On/Off
Allows you to turn the Front Document Printer on or off.
Enter 1 to turn on or 0 to turn off.
F42 Rear Document Printer
On/Off
Allows you to turn the Rear Document Printer on or off.
Enter 1 to turn on or 0 to turn off.
F44 Omit Printing on the Next
Document Only
Allows you to specify no information be printed on the
next document scanned. Printing will resume on
subsequent documents. Enter 1 to omit printing on the
next document, or enter 0 to print on the next document
then press Enter.