Filter
Top Products
A-61070 September 1999 8-23
Using the Patch Reader
The
Kodak Digital Science
Patch Reader controls document level
changes by automatically sensing a pre-defined patch code and
changing the document level accordingly.
During installation, modes are defined for use with specific applications.
Patch reading may be enabled or disabled for each mode.
Patch types
During installation, the patch type(s) used are defined for each mode.
The Patch Reader is capable of reading three types of patches.
Patch III — assigns a Level 3 to the
current
document.
Patch II — assigns a Level 2 to the
current
document.
Patch T/Transfer Patch — assigns a predetermined level to the
next
document.
The Transfer Patch Definition is also defined at installation. The
Transfer Patch Definition controls the level assigned to the next
document when a Transfer Patch is used. For example, if the Transfer
Patch Definition for the current mode is defined as Level 3 and a
Transfer Patch is used, the next document will be assigned Level 3.