Filter
Top Products
A-61070 September 1999 8-11
9. Prepare the bar code to be evaluated by cutting around the bar
code so only the vertical black and white bars remain. Cut away all
text and surrounding marks or illustrations.
NOTE: The bar code used must be the same type indicated in the
first line of the status display of the first page.
Document and
surrounding text
10. Use transparent adhesive tape to adhere the bar code to the
appropriate imaging guide in the proper direction. If the Bar Code
Reader is set to read data through the front scan module, adhere
the bar code to the front imaging guide and ensure that the bar
code is facing the front scan module. If the Bar Code Reader is set
to read data through the rear scan module, adhere the bar code to
the rear imaging guide and ensure that the bar code is facing the
rear scan module.
Transparent
adhesive tape
Bar code (should
face
the front of
the
scanner)
Front image guide (surface
facing the rear of the