Filter
Top Products
1-4 A-61070 September 1999
Rear View — Document Scanners 5500/7500
Coin 1/3
Coin 2
SCSI connectors
Footswitch
connector
Serial #
Power switch
Power cord
connector
Footswitch connector — allows you to plug in the optional Footswitch
accessory.
Serial number — provides the serial number and agency approvals.
Power switch — toggle this switch to turn the power on (|) or off (O).
Power cord connector — plugs into an appropriate power outlet.
Coin 1/3 — service/diagnostic interface. Configures the scanner and
runs diagnostics.
Coin 2 — not for customer use.
SCSI connectors — SCSI interface connection for the scanner.
For European units only:
WARNING:
Communications between the Scanner 5500/7500
and the host computer including both the SCSI cable
(TDK: HF70RH26X29X13) and RS-232 cable
(TDK: HF70RH12X15X7.3) must have ferrite cores.
These ferrite-cored cables are used for radio
frequency interference suppression.