Filter
Top Products
Specifying Printer Driver Settings
89
Options Installed
Image RGB Intent Specifies RGB intent for image as Vivid,
Photographic, Relative Color, or Absolute
Color.
The default setting is Photographic.
Image RGB Source Specifies RGB source for image as None,
sRGB, Adobe RGB (1998), Apple RGB,
ColorMatch RGB, or Blue Adjust RGB.
The default setting is sRGB.
Parameters Settings
Duplex Unit Select Enable if the optional duplexing unit
for the printer has been installed.
The default setting is Disable.
Output Tray Unit Select Enabled if the output tray unit (staple
finisher) is installed. Select Disabled if it is
not installed.
The default setting is Disabled.
Paper Source Unit Select Unit 3 or Unit 3 + Unit 4 if the optional
trays for the printer have been installed.
The default setting is Disable.
Printer Memory Select 256 MB, 512 MB, 768 MB, or
1024 MB if the optional memory for the
printer has been installed.
The default setting is 256 MB.
Storage Select None, CF (1GB Under), CF (1GB
Over), HDD, HDD + CF (1GB Under) or
HDD + CF (1GB Over) for the storage unit
that is installed.
The default setting is None.
Parameters Settings