Filter
Top Products
Configuring the Printer
241
Default Gateway* If a router is used on the network, sets the router’s
address.
Range: 0–255 for each xxx triplet
Default: 0.0.0.0
" If the specified router address is outside of the
allowable range, the value is not changed, even
after the Apply button is clicked. The setting
returns to the previous value.
Configuration Menu Equivalent:
INTERFACE MENU - ETHERNET - TCP/
IP - DEFAULT GATEWAY
Raw Port Select whether or not RAW port is used.
Choices: Enable, Disable
Default: Enable
RAW Port
Number
Identifies the number of the printer’s RAW port.
Choices: 1 - 65535
Default: 9100
Host Name Specifies the host name.
Range: Up to 63 characters
Default: MC5570-xxxxxx
MC5550-xxxxxx
" xxxxxx displays six last digits of the MAC address
in hexadecimals.
Domain Name Specifies the domain name.
Range: Up to 63 characters
Default: [Blank]
DNS Server Specifies the DNS server. Up to three can be registered.
Default: 0.0.0.0
Dynamic DNS Select whether or not Dynamic DNS is used.
Choices: Enable, Disable
Default: Disable
LPD Select whether or not LPD is used.
Choices: Enable, Disable
Default: Enable
Item Description