Filter
Top Products
6.1 Setting Up the Fax Registration
6
Fax Kit (FX-3) 6-19
Using the Utility Mode (Fax) Chapter 6
2 Press the [4] key from the 10-Key
Pad to select “PROGRAM DIAL”.
3 Press the one-touch dial key ([24]
through [27]) programmed with the
mailbox transmission that you
wish to change or delete.
4 Press the [No] key.
5 Using the [ ] and [Ö ] keys, select
either “EDIT” or “DELETE”, and
then press the [Yes] key.
❍ If “EDIT” was selected, the
specified recipient is
displayed. (Continue with step 6.)
❍ If “DELETE” was selected, the program dialing settings are deleted and the
“SELECT REGIST.KEY” screen appears again.
6 To change the recipient, press the
[No] key, and then by using the
one-touch dial keys or the speed
dial numbers, or by entering the
fax number using the 10-Key Pad,
specify a different recipient.
7 Press the [Yes] key.
The mailbox ID is displayed.
8 To change the mailbox ID, press
the [No] key, and then use the 10-
Key Pad to enter the new ID.
9 Press the [Yes] key.
The password is displayed.
Ö