Filter
Top Products
7.4 PageScope Light
7
Fax Kit (FX-3) 7-9
Appendix Chapter 7
● Remote Status Monitoring
Check the details of machine trays, information about consumables, or the total
number of prints
Check the status of jobs that are being printed, or held in the print queue (Jobs
can also be deleted if you have logged in to the Administrator mode.)
System Requirements
PageScope Light can be used in the following system environments.
Accessing PageScope Light
PageScope Light is accessed directly using a Web browser.
1 Start up your Web browser.
2 Enter the IP address of the machine into the URL box, and then press the
[Enter] key.
http://<machine_IP_address>/
❍ (Example) If the machine IP address is 192.168.0.10, enter:
http://192.168.0.10/
3 The PageScope Light screen appears.
✎
Note
In order to access PageScope Light, an IP address must be assigned to the
machine.
Using PageScope Light
PageScope Light is used in the same way as other Internet Web pages. Click on
links in the page to jump to that page, and use the [Back] and [Next] buttons to
navigate through pages that have already been loaded.
OS Windows 95 (OSR 2.5), Windows 98, Windows 98 SE, Windows ME,
Windows NT 4.0, Windows 2000, or Windows XP
Browser Microsoft Internet Explorer 4.0 or later
Netscape Navigator 4 or later