Filter
Top Products
4.1 Transmission Methods
4
Fax Kit (FX-3) 4-3
Fax Transmission/Reception Methods Chapter 4
5 Press the [Memory TX] key, and
then check that the Memory TX
lamp lights up.
✎
Note
If the Memory TX lamp is not
lit, the direct transmission is
selected.
6 Press the [Start] key to begin scanning and sending the fax.
❍ To stop the transmission, press the [Stop] key, and then press the [Yes] key
in the next screen that appears.
Once transmission is finished, a beep is sounded.
If the fax could not be sent, the transmission result report is printed (p. 6-48).
Direct Transmission
If the Memory TX lamp is not lit, the direct transmission is selected. One page of the
document at a time can be scanned, according to the transmission status. This
ensures that even documents with many pages can be sent.
✎
Note
When faxing using direct transmission, the document should be loaded into the
Automatic Document Feeder. Transmission is not possible by positioning the
document on the Original Glass.
If direct transmission is specified while a fax is being sent or received, the
transmission will be queued.
With direct transmission, multiple recipients cannot be specified.
Direct transmission and timer transmission cannot be performed at the same
time.