Konica Minolta (FX-3) Fax Machine User Manual


 
4.1 Transmission Methods
4
Fax Kit (FX-3) 4-5
Fax Transmission/Reception Methods Chapter 4
To send a fax manually
1 Load the document into the Automatic Document Feeder.
2 If necessary, change the Resolution setting (p. 3-11).
3 Pick up the telephone receiver.
Check that the dial tone can be
heard.
4 Specify the fax number of the recipient.
Use the telephone to dial the fax number.
The fax number of the recipient can also specified using the keys in the
control panel of this machine (p. 3-2).
5 After finishing talking on the phone, the recipient should press the necessary
key to start receiving the fax.
Once the recipients fax machine is ready, a beep is sounded.
6 Press the [Start] key to begin
scanning and sending the fax.
7 Replace the telephone receiver.
To stop the transmission, press the [Stop] key, and then press the [Yes] key
in the next screen that appears.
Tip
If the [Speaker] key is pressed instead of picking up the telephone receiver, the
speaker can be used for manual transmission in the same way as described
above.