Filter
Top Products
3.1 Dialing
3
Fax Kit (FX-3) 3-7
Faxing Chapter 3
To fax using program dialing
If one-touch dial keys have already been programmed with fax numbers and a
transmission/reception function (such as timer transmission or polling reception),
that function can be carried out by pressing just the corresponding one-touch dial
key.
For details on setting program dialing, refer to “Specifying the Setting for
“PROGRAM DIAL”” on page 6-15.
1 Press the [Fax] key to enter Fax mode.
2 Load the document into the Automatic Document Feeder.
❍ For details on placing the document on the Original Glass, refer to “To fax
documents positioned on the Original Glass” on page 3-13.
❍ This step is not necessary with polling reception.
3 If necessary, change the “Resolution” setting (p. 3-11).
❍ This step is not necessary with polling reception.
4 Press the one-touch dial key ([24]
through [27]) programmed with the
desired function.
5 Press the [Start] key.
The programmed function
automatically begins.
✎
Tip
If the wrong one-touch dial key has been pressed, press the [Stop] key, and
then press the [Yes] in the next screen that appears.
To cancel a timer transmission, select “CANCEL RESERV.” from the
“FUNCTION” menu (p. 4-20).