Filter
Top Products
6
6.2 Setting Up the Transmission
6-32 Fax Kit (FX-3)
Using the Utility Mode (Fax) Chapter 6
Specifying the Setting for “SCAN CONTRAST”
1 Select the “TX OPERATION”.
❍ Refer to “Selecting the “TX OPERATION” menu” on page 6-31.
2 Press the [1] key from the 10-Key
Pad to select “SCAN
CONTRAST”.
3 Using the [ ] and [Ö ] keys, select
one of the five settings between
“LIGHT” and “DARK”, and then
press the [Yes] key.
The “TX OPERATION” menu
appears again.
Specifying the Setting for “RESOLUTION”
1 Select the “TX OPERATION”.
❍ Refer to “Selecting the “TX OPERATION” menu” on page 6-31.
2 Press the [2] key from the 10-Key
Pad to select “RESOLUTION”.
3 Using the [ ] and [Ö ] keys, select
the desired resolution setting, and
then press the [Yes] key.
❍ The resolution settings appear
as follows.
STD: Standard
FINE: Fine
S/F: Super Fine
H/T: Half Tone
If “H/T” was selected, a screen appears, allowing you to make a detailed setting.
(Continue with step 4.) If any setting other than “H/T” was selected, the “TX
OPERATION” menu appears again.
Ö
Ö