Filter
Top Products
|
Konica FAX 993012
Using the Button on the Network Card
!
Some Network Cards may not have a black button.
If yours does not, refer to the previous section, “Using
the Fax Machine’s Menu.”
1 Press the black button on the network card for three
seconds.
2 Release the button.
3 Two reports print.
one report is similar to the NIC Information Report
(generated through the menu)
one report is the network card self-diagnostic report
!
If you turn the power on while pressing this button
down, the Network Card will initialize its settings.
Settings Stored on the Fax Machine
General Information
User Functions 80 to 93 are reserved for network settings.
User Functions 80 to 82 are for network printing.
User Functions 83 to 93 are for faxing using the Internet.
User Function 93, Network Settings, is used to configure the
network card. Network settings can also be changed over a
network, using various tools.
!
If your network card cannot fax using the Internet,
User Functions 83 to 93 will not display.
!
You must work with your network administrator to
determine the correct information for many of the
settings.
Accessing Settings
1 Press Menu/Exit to enter the menu.
2 Press Ä or¶ until Setup appears on the display.
Press Enter.
3 Press Ä or¶ until LANOPTIONS appears on the display.
Press Enter.
4 Press Ä or¶ until the desired setting (user function)
appears on the display.