Filter
Top Products
|
Konica FAX 993022
try entering the IP address of the SMTP server.
Restrictions
••
••
• If DNS has been set, use the host name (e.g.,
mail.network.com).
••
••
• If DNS has not been set, enter the IP address of the server.
The address must include the “.” (period) dividers (e.g.,
192.168.4.123).
••
••
• up to 64 characters may be entered.
You may use Latin letters, numbers and symbols.
To enter symbols, use either one-touch key 20 or key “0” of
the numeric ten-key pad.
The symbols that can be used are: ! # & ’ ( ) * + , - . / : ; =
? · @ ? ” _ % ~
The “~” (tilde) symbol shows on the display as “
-1
”.
Both uppercase and lowercase letters can be used.
To change the case, press the CAPS key
(one-touch key 31).
6: POP USER ID
Enter the user ID registered on the POP3 server.
Restrictions
••
••
• up to 16 characters may be entered.
You may use Latin letters, numbers and symbols.
To enter symbols, use either one-touch key 20 or key “0” of
the numeric ten-key pad.
The symbols that can be used are: ! # & ’ ( ) * + , - . / : ; =
? · @ ? ” _ % ~
The “~” (tilde) symbol shows on the display as “
-1
”.
Both uppercase and lowercase letters can be used.
To change the case, press the CAPS key
(one-touch key 31).
7: POP PASSWORD
Enter the password registered on the POP3 server.
If a password has already been entered, it is shown as
XXXXXXXXXXXXXXXX (sixteen Xs).
Restrictions
••
••
•
up to 16 characters may be entered.
You may use Latin letters, numbers and symbols.
To enter symbols, use either one-touch key 20 or key “0” of
the numeric ten-key pad.
The symbols that can be used are: ! # & ’ ( ) * + , - . / : ; = ? ·
@ ? ” _ % ~
The “~” (tilde) symbol shows on the display as “
-1
”.
Both uppercase and lowercase letters can be used. To change
the case, press the CAPS key (one-touch key 31).
5: POP SERVER NAME
Enter either the IP address or the host name of the POP mail
server.
!
If the DNS name of the SMTP server does not work,