Filter
Top Products
|
T.37Internet FAX User’s Guide 47
Other Operating Systems
Other operating systems, such as Macintosh or UNIX, are not
supported.
Configuring from Network Utilities
(also known as CD Setup Utilities)
The network card configurations may be altered from a PC
via the network, using the utilities on the CD-ROM. The
configuration settings can be accessed from the installer.
With these utilities, TCP/IP and NetWare parameters may be
configured.
For more details, see the information on the supplied
CD-ROM.
!
When using the above utilities, the setup screen for
EtherTalk, which the fax machine does not support, will
be displayed.
Set EtherTalk “Disable” to prevent it from being used.
Configuration
Network settings can be modified through the front panel
(menu) of your fax machine via User Function 93: Network
Settings.
1 Press Menu/Exit to enter the menu.
2 Press ¶ to select Setup, press Enter.
3 Press Ä or¶ until LANOPTIONS appears on the display.
Press Enter.
4 Press Ä or¶ until User Function 93: NETWORK
SETTINGS appears on the display.
To print from Windows using LPR, it is necessary to set the IP
ADDRESS (User Function 93, Setting 1). This is not required
if printing from NetWare only. It is necessary for using
Internet Fax functions.
Settings
1: IP ADDRESS
Sets the IP address.
2: SUBNETMASK
Sets the subnet mask.
3: DEFAULT GATEWAY
Sets the default gateway address.