Filter
Top Products
|
Konica FAX 99302
To make a LAN connection, the following information must
be configured on this machine. Ask your network
administrator about these settings.
• an IP Address
• SubnetMask
• Default Gateway
If the LAN uses a DHCP server, it is not necessary to
configure these settings as the server will do it automatically.
Internet Fax settings can be configured either by using the
network tool or on the machine itself, but DHCP settings are
supported by the network tool only.
After setting the correct IP Address, SubnetMask and Default
Gateway, configure the machine for Internet Fax
transmission/reception.
Internet Fax Transmission
General Information
To send an Internet Fax message, you need a mail server from
which to send e-mail.
Please consult your network administrator about the settings
listed below, which are required in order to make a
connection to the mail server.
• SMTP Server Address / Name
• DNS Server’s IP Address
• Host Name
• e-mail Address
These settings are similar to those of popular mail clients
such as Netscape Messenger, Outlook and Eudora.
You can start transmission when these settings have been
configured.
To send a fax, place a document on the machine and press the
one-touch button on which the e-mail address of the recipient
has been registered; the document will be scanned into
memory and before transmission.
The data will be converted into a TIFF file and sent to the
recipient.