Filter
Top Products
|
T.37Internet FAX User’s Guide 27
SNMP
The items listed here are only accessed via the web page.
You can also use the web page to adjust the settings for
User Function 93, Network Settings.
SMTP Transmit
Enables or disables the SMTP transmission protocol
For normal operations, set this to Enable.
SMTP Receive
Enables or disables the SMTP reception protocol
For normal operations, set this to Enable.
If you do not wish to receive by SMTP, set this to Disable
!
SMTP reception forwards incoming Fax mail.
POP3
Enables or disables the POP reception protocol.
For normal operations, set this to Enable.
SMTP Port Number
Sets the SMTP protocol port number.
Do not change this unless it is necessary.
The default setting is 25.
POP Port Number
Sets the POP protocol port number.
Do not change this unless it is necessary.
The default setting is 110.
Use APOP
This setting is available when you are using a POP server
that supports APOP.
With APOP, the POP password will be encrypted before
it is sent.
A communication error will occur if this setting is turned
on when using a server which does not support APOP.
Printer Menu
The Printer Menu provides information about Paper,
Trays, Timers and Alarms, and Emulations.
This menu should not be displayed for this machine.
If it does display, you will not be able to change its settings.
Telnet
Your fax machine is Telnet capable.
You can use Telnet (via the network) to change the network
settings for your machine.
The differences are explained in this section.