Filter
Top Products
|
T.37Internet FAX User’s Guide 53
F040 POP protocol DELE command error
F050 POP protocol TOP command error
F900 Network Card I/F error
F910 TCP/IP or SMTP/POP not supported or allowed by
Network Card
F920 Network Card not ready; transmission request
received while Network Card is initializing
(redial)
F931 E-mail cannot be received (invalid TIFF)
F932 E-mail cannot be received (other than invalid
TIFF)
F940 Memory full
F941 No new mail found in manual reception
F942 Command time-out
F950 Server communication error
F980 Aborted
Transmission Troubleshooting
Transmission fails; a communication error occurs.
See if the server is down.
Are the IP ADDRESS, SubNetMask and Default Gateway
settings correct?
Has the SMTP server been configured correctly?
Has the host name been registered?
If using DNS, is the DNS server address correct?
If DNS is ON, some servers may cause an error.
Display shows message “OPTION BOARD ERROR.”
An error may have occurred at the interface between the
fax machine and the network card.
Turn off the fax machine. Verify that the network card is
correctly installed. Turn the machine on.
I have turned MDN (or DSN) ON, but no confirmation has
been returned.
Both MDN and DSN are sent as text-format messages. If
the TEXT PRINT setting is OFF, the confirmations will not
be print.
MDN: If the receiving Internet Fax/e-mail client is not
capable of receiving MDN, you may not get a receipt.
DSN: If the receiving server does not support DSN, you
may not receive any confirmation.