Filter
Top Products
|
T.37Internet FAX User’s Guide 15
POP Interval
User Function 83
Use this to set the interval between POP receptions.
If the interval is set to 0, no automatic receptions occur. All
receptions are generated manually.
Available settings are 0 to 60 minutes, adjustable by the
minute.
The default setting is 5 minutes.
Delete POP Message
User Function 84
Use this to determine how the received e-mails are deleted
from the mail server.
If this user function is set to OFF, received e-mails remain on
the POP server until the Network Administrator deletes them.
Available settings are:
OFF: Do not delete mail
TYPE1: Delete only the mail your fax machine can print
TYPE2: Delete all mail
The default setting is Type 2.
50 Communications Limit
Your fax machine maintains a log of up to 50
communications.
This log prevents repeat receptions of any messages that have
already been read.
However, if there are more than 50 messages on the server,
you may experience errors.
Your fax machine will receive and print e-mails, but the log
will not be correct.
To correct this error
Have the network administrator delete the received e-mails
(mail data) on the mail server.
Make sure there is no mail.
Activate the POP reception on your fax machine.
This procedure will erase the log of the 50 previous
communications.
To prevent this error
If automatic POP reception is carried out while there is no
mail, the log will also be erased.
Regularly delete the received e-mails from the mail server,
keeping the number of records on the log below 50.