Filter
Top Products
|
Konica FAX 993058
!
The setting for this function always applies when using
Internet Fax.
IFAX Sender ID (User Function 89) is independent from
Sender ID On/Off (User Function 23).
If you are using your fax as a scanner, turn this setting
off. This prevents the sender ID data from appearing in
scanned images.
My fax machine sender ID is not included in documents I
am sending.
Check the setting for User Function 90: IFAX Sender ID.
Make sure it is ON.
This function determines if the sender ID is included with
images scanned by the Internet Fax.
Available settings are: ON or OFF.
The default setting is ON.
!
The setting for this function always applies when using
Internet Fax.
IFAX Sender ID (User Function 89) is independent from
Sender ID On/Off (User Function 23).
If you are using your fax as a scanner, turn this setting
off. This prevents the sender ID data from appearing in
scanned images.
I’ve entered the DNS name of the SMTP server, but it
doesn’t work.
Try entering the IP address.
I’ve changed the settings for the network card (User
Function 93), but the changes are not being implemented.
Press MENU while the initialization message was displayed?
Pressing MENU while the initialization message is on
display (after changing the settings) will cause the
machine to “lose” the setting changes and the settings will
not update correctly.
My server does not support APOP, and my fax machine is
experiencing communication errors
Make sure the Setting, Use APOP, is set to OFF.
This setting is available when you are using a POP server
that supports APOP.
With APOP, the POP password will be encrypted before it is sent.
A communication error will occur if this setting is turned
on when using a server which does not support APOP.