Konica Minolta Printer Copier Printer User Manual


 
Introduction
1
Konica 7115/7118 1-3
WARNING
Do not modify this product: Fire, electrical shock, or breakdown could result. If the product employs
a laser, the laser beam source could cause blindness.
Do not attempt to remove the covers and panels which have been fixed to the product. Some prod-
ucts have a high-voltage part or a laser beam source inside that could cause an electrical shock
or blindness.
Use only the power cord supplied in the package. Failure to use this cord could result in fire or
electrical shock.
Use only the specified power source voltage. Failure to do so could result in fire or electrical shock.
Do not use a multiple outlet adapter to connect any other appliances or machines. Use of a power
outlet for more than the marked current value could result in fire or electrical shock.
Do not unplug and plug in the power cord with a wet hand: An electrical shock could result.
Plug the power cord all the way into the power outlet. Failure to do so could result in fire or electrical
shock.
Do not scratch, abrade, place a heavy object on, heat, twist, bend, pull on, or damage the power
cord. Use of a damaged power cord (exposed core wire, broken wire, etc.) could result in fire or
breakdown.
Should any of these conditions be found, immediately turn OFF the power switch, unplug the
power cord from the power outlet, and then call your authorized service representative.
In principle, do not use an extension cord. Use of an extension cord could cause fire or electrical
shock. Contact your authorized service representative if an extension cord is required.
Do not place a flower vase or other container that contains water, or metal clips or other small metallic
objects on this product. Spilled water or metallic objects dropped inside the product could result in
fire, electrical shock, or break-down.
Should a piece of metal, water, or any other similar foreign matter get inside the product, immediately
turn OFF the power switch, unplug the power cord from the power outlet, and then call your autho-
rized service representative.
If this product becomes inordinately hot or emits smoke, or emits an unusual odor or noise, imme-
diately turn OFF the power switch, unplug the power cord from the power outlet, and then call your
authorized service representative. If you keep on using it as is, fire or electrical shock could result.
If this product has been dropped or its cover damaged, immediately turn OFF the power switch,
unplug the power cord from the power outlet, and then call your authorized service representative.
If you keep on using it as is, fire or electrical shock could result.
Do not throw the toner cartridge or toner into an open flame. The hot toner may scatter and cause
burns or other damage.
Connect the power cord only to an electrical outlet that is equipped with a grounding terminal.
Konica7115_7118.book Page 3 Friday, October 19, 2001 12:02 PM